Spectrum filament Nylon PA6 Low Warp 1.75mm Black 0.5kg

Solid and at the same time very durable material resistant to mechanical stress.

Spectrum PA6 Low Warp is an extremely durable construction material based on polycaprolactam enhanced with additives to reduce strong shrinkage, which is characteristic of printing this material. The most important properties of the Spectrum PA6 Low Warp filament include:

✔️ Resistance to lubricants and oils,

✔️ High impact strength

✔️ Very good mechanical properties.

Better cohesion of the Spectrum PA6 Low Warp material allows significantly reducing the "warping" effect (especially in the corners of the printed model). The reduction of this negative effect is related to low shrinkage during production at the level of 0.3%.

The additives used in the production of the Spectrum PA6 Low Warp material make it a self-lubricating material, so the manufactured parts can be used in conditions where friction occurs. In addition, the printed elements will have good electrical insulating properties and will also exhibit physical indifference.

To achieve the very interesting properties of the Polyamide Low Warp material, it is necessary to technically adhere to the basic rules for storing these materials (in a dry and dark place with humidity below 15%). To achieve the best parameters of the printed object, it is recommended to dry the material before starting the printing.